How far it has spread and how long the board stayed wet decide that. A visit settles it: we check the wall, and if it needs to come out, the quote is on paper. If a scrub and repaint will do, that's what we'll say.
Can I just clean mold off drywall myself?
Sometimes, but only when the growth is a light film sitting on the surface. Drywall is porous. Once mold has worked into the paper facing or the gypsum core, wiping the surface leaves the problem behind the paint, and the smell comes back.
That's the usual reason people call us. The affected area is too big to patch around, or the board has been wet long enough that cleaning the face won't reach what's inside. A small patch that is dry and hasn't spread is often something you can handle without hiring anyone.
How does the removal work?
We take the affected drywall out. We don't seal it in place or treat it where it sits.
Before we pull a section, we mist it lightly so dust doesn't go airborne while it comes off the wall. We keep the mist light on purpose. Soaked drywall breaks apart and gets harder to handle.
The debris goes into 6-mil polyethylene disposal bags, and the bags go out of the house with the crew.

What decides the price of drywall mold removal?
One small patch in a single room sits near the bottom. Growth running through several rooms sits near the top.
Describe the room and the damage on the phone and we'll give you a typical range.
Does the water source need to be fixed first?
Yes. Mold comes back as long as the wall keeps getting wet. A leaking supply line, a roof leak or a damp basement wall will feed new growth on fresh drywall just as it fed the old.
Our first questions about a wall are what water event started the mold and whether the spot has stayed wet since. If something else has to be repaired before drywall goes back up, we'll tell you that first, so you don't pay to remove mold that returns.
What happens when I call?
Tell us what the wall looks like, how long the stain or smell has been there, and whether it still feels damp. That's all we need to set up a visit. Remediation, an insurance claim and a repair plan can all wait until after the visit.
At the visit we inspect the affected drywall, explain what we think is causing it, and hand you the scope and cost on paper. If you don't need a crew, we'll say that and leave it there.
Inside the Job
Spelled out, it tends to involve:
- After contaminated material is removed and the area is dry, HEPA-vacuum the remediation area and clean the work and worker-egress areas with a damp cloth or mop and detergent.
- Check the drywall for swelling and whether its seams remain intact; EPA guidance says drywall may be dried in place if it is not swollen and its seams are intact, and otherwise should be removed and discarded.
Communities We Cover
We work across Ann Arbor, MI and nearby communities including Ypsilanti, Saline, Whitmore Lake, Dexter, Novi. Call (734) 794-3287 to double-check your area.
- Ann Arbor, MI
- Ypsilanti
- Saline
- Whitmore Lake
- Dexter
- Novi
We cover 6 communities.