Moldy drywall
What it means: A plumbing leak or other water intrusion can wet drywall, where mold may be difficult to remove from the porous material.
What we check: Moisture source and the extent of damage behind the drywall.
Tell us what you're seeing, we'll give you a straight answer and a free estimate in Ann Arbor.
Fast Scheduling
Talking it through by phone takes a few minutes, you'll get an honest answer.
No obligation
Call (734) 794-3287What happens next
You found a dark patch on the basement wall, or a musty smell that comes back after every cleaning, or stained drywall under a bathroom. Is it mold, how far has it spread, and what will it cost to deal with? We're a mold remediation crew serving Ann Arbor, and a look at the spot in person tells us whether it's surface staining or something deeper. We trace the moisture to its source, tell you what we find, and write up the work and the cost before we touch anything.
The usual cause behind each one, and the first thing we check.
What it means: A plumbing leak or other water intrusion can wet drywall, where mold may be difficult to remove from the porous material.
What we check: Moisture source and the extent of damage behind the drywall.
What it means: Roof leaks, condensation, or inadequate ventilation can leave attic materials damp.
What we check: Roof leaks, attic moisture, and ventilation conditions.
What it means: Water intrusion, leaks, or damp conditions can cause mold on basement surfaces and materials.
What we check: Water entry, damp materials, and whether walls conceal affected areas.
What it means: Ground moisture, leaks, or poor ventilation can keep crawl-space framing damp.
What we check: Moisture source, framing, and affected insulation.
Moisture gets in and stays. Mold is the symptom. Winters here are cold continental with hard freezes, so for months the outer surfaces of a house are far colder than the air inside. Warm, damp indoor air reaches a cold attic deck, a rim joist or a basement wall and drops its water there. Do that all season and you get dark growth on wood that never saw a leak.
The ground adds to it. Silty clay loam and prairie soil run deep around here, and soil that heavy holds water against a foundation rather than draining it off. A basement wall or crawl-space framing sitting against wet ground is a natural place for dampness to build.
Then there's age. The median house here was built in 1971, so many homes have more than fifty winters of wear on their roofs, plumbing and foundation seams. A small, slow leak that's been going for years is common, and it's usually the real reason the stain keeps coming back.
Each spot has its own moisture story, so each gets its own plan. Stained or moldy drywall usually points to a leak or a long run of humidity. Growth on attic sheathing usually means warm indoor air is reaching the cold roof deck. Growth on basement walls or crawl-space framing usually means water or damp air is coming in from outside or from below.
The wet material and the growth are one problem. If we only deal with the mold, the damp that fed it is still there. If we only dry things out, the growth that's already in the material stays.

We assess the affected area and identify the moisture source before we plan any cleanup. If we quoted removal without knowing where the water is coming from, the quote would be a guess, and the mold would come back.
On the visit we check how far the growth spreads and what it's on. Is it sitting on the surface of the framing, or has it gone into drywall we'd need to cut out? Then we trace the moisture back to its origin: a leak, condensation, a humidity problem or water coming in from outside. Sometimes the source is obvious. Sometimes it takes more looking, and we'll tell you when we're not sure yet.
You then get a written scope. It lists what we'll remove or clean, what we'll do about the moisture, and what's driving the price. Price moves with the square footage affected, the material the mold is growing in, how tight the space is to work in, and how much repair the moisture source needs. A small patch on attic sheathing and a damp, wide-open crawl space aren't the same job, and they won't be priced the same. If permits or inspections apply to your job, they'll be written into the scope too.
A proper job repairs the leak or the humidity problem, so the condition that fed the mold is gone. Spray the growth, paint over it, and in a cold, damp space it's often back within a season.
That's why the moisture repair is part of our scope, not an add-on you discover later. If the real fix belongs to a roofer or a plumber, we'll tell you that up front rather than claim the whole job.
Stop adding moisture and leave the growth alone. Fix the obvious things: a dripping pipe, a wet spot, a bathroom fan that isn't running. Don't scrub or sand the mold, because that mostly spreads it. Take a few dated photos so we can see how it's changing.
Some situations don't call for a crew. A small stain from a one-time spill that's dry and gone is a different situation from a smell that keeps coming back or growth that keeps spreading. If we look and the answer is that you can handle it yourself, we'll say so.
The first call is short: where the problem is and what it looks or smells like. Nothing gets decided on it, and we set a time to come look. What you walk away with is a written scope, so you can see exactly what we'd do and why.
Find the problem that sounds like yours and go straight to it.
Illustrative photos by service type, to help you plan your project.






Read these as planning figures, and we can talk through a typical range before anything is booked.
$300–$1,000
$3,000–$10,000
$600–$2,000
We match the choice to how you'll use it, not to what's handy.
No obligation
Call (734) 794-3287What happens next
This is the path from your first message to a clear answer.
A few minutes on the phone is enough to tell us what we're working with and what to check first.
We come out and measure what's actually happening, and you see what we see.
You get a written scope with the price on it, take your time with it.
We complete the repair and verify it solved the problem. You see everything we did.
We work across Ann Arbor, MI and nearby communities including Ypsilanti, Saline, Whitmore Lake, Dexter. Call (734) 794-3287 to double-check your area.
We cover 5 communities.
ZIP codes: 48103, 48105, 48104, 48108, 48109.